Overalls. High collar closed by concealed press studs. Zip fastening with concealed studded flap. Elasticated back and waist on both sides.
Gusset on back. Adjustable cuffs with press-studs. 5 pockets including 1 inner. 2 gas detector holders.
Twill 99% cotton 1% Antistatic fibre 320 g/m².
EN ISO 13688:2013/A1:2021 General requirements for protective clothing.
Protective clothing - clothing to protect against heat and flame.
EN ISO 11612:2015 Protective clothing - clothing to protect against heat and flame.
A1, A2 Limited flame spread (from A1 to A2, X=not tested)
B1 Convective heat (from B1 to B3, X=not tested)
C1 Radiant heat (from C1 to C4, X=not tested )
X Projection of molten aluminium (marking D1 to D3, X= not tested)
E3 Projection of molten cast iron (from E1 to E3, X=not tested)
F1 Contact heat (from F1 to F3, X=not tested)
EN ISO 11611:2015 Protective clothing for use in welding and related techniques
Welding class 1: Protection against low risks, low projections and radiant heat
TYPE A1 Type A1 - ISO 15025 Test Method A
TYPE A2 Type A2 - ISO 15025 Test Method B
Electrostatic properties - Part 5: Material performance and design requirements
EN1149-5:2018 Electrostatic properties - Part 5: Material performance and design requirements
Surface resistivity inferior or equal to 2.5x(10)9 Ohms on one surface at least following EN1149-1
t50 <4s or S> 0.2 by method 2 (charging by induction) of EN1149-3
EN14404:2004+A1: 2010 Knee protection for kneeling work
TYPE 2 Type 2 Knee Protection - In trouser pocket or attached to trousers in another manner
LEVEL 0 Performance level against the mecanics dangers (0 to 2). If level 0, the pictogramme is not included.
Protective clothing against the thermal hazards of an electric arc.
EN61482-2:2020 Protective clothing against the thermal hazards of an electric arc.
APC APC 1 Electrical arc protection class of materials and garments (APC 1=4kA or APC 2=7kA).
CAL/CM² 5.4 cal/cm² Arc Thermal Performance Value (cal/cm²) .
Оплата позже в 1-3 равных частей без процентов и договорных комиссий. Никаких скрытых комиссий! Разместите заказ, и тогда мы приступим к выполнению контракта.
В наличии на складе поставщика. Ожидаемая доставка при заказе: 04.09.2024
← вернуться
Оплатите частями
1.Оплатить до 24.09.202439.5 €
2.Оплатить до 24.10.202439.5 €
3.Оплатить до 24.11.202439.5 €
Мы отправим вас на следующую страницу для ввода данных.
← вернуться
€
max 5000 €
%
или 0.00 €
ОРИЕНТИРОВОЧНЫЙ ЕЖЕМЕСЯЧНЫЙ ПЛАТЕЖ00.00 €Содержит интерес
Мы отправим вас на следующую страницу для ввода данных.
Oписание
Информация товара
Overalls. High collar closed by concealed press studs. Zip fastening with concealed studded flap. Elasticated back and waist on both sides.
Gusset on back. Adjustable cuffs with press-studs. 5 pockets including 1 inner. 2 gas detector holders.
Twill 99% cotton 1% Antistatic fibre 320 g/m².
EN ISO 13688:2013/A1:2021 General requirements for protective clothing.
Protective clothing - clothing to protect against heat and flame.
EN ISO 11612:2015 Protective clothing - clothing to protect against heat and flame.
A1, A2 Limited flame spread (from A1 to A2, X=not tested)
B1 Convective heat (from B1 to B3, X=not tested)
C1 Radiant heat (from C1 to C4, X=not tested )
X Projection of molten aluminium (marking D1 to D3, X= not tested)
E3 Projection of molten cast iron (from E1 to E3, X=not tested)
F1 Contact heat (from F1 to F3, X=not tested)
EN ISO 11611:2015 Protective clothing for use in welding and related techniques
Welding class 1: Protection against low risks, low projections and radiant heat
TYPE A1 Type A1 - ISO 15025 Test Method A
TYPE A2 Type A2 - ISO 15025 Test Method B
Electrostatic properties - Part 5: Material performance and design requirements
EN1149-5:2018 Electrostatic properties - Part 5: Material performance and design requirements
Surface resistivity inferior or equal to 2.5x(10)9 Ohms on one surface at least following EN1149-1
t50 <4s or S> 0.2 by method 2 (charging by induction) of EN1149-3
EN14404:2004+A1: 2010 Knee protection for kneeling work
TYPE 2 Type 2 Knee Protection - In trouser pocket or attached to trousers in another manner
LEVEL 0 Performance level against the mecanics dangers (0 to 2). If level 0, the pictogramme is not included.
Protective clothing against the thermal hazards of an electric arc.
EN61482-2:2020 Protective clothing against the thermal hazards of an electric arc.
APC APC 1 Electrical arc protection class of materials and garments (APC 1=4kA or APC 2=7kA).
CAL/CM² 5.4 cal/cm² Arc Thermal Performance Value (cal/cm²) . Фото и видео носят иллюстративный характер.
Удобная история покупок, обслуживания и гарантийных работ онлайн
Уже зарегистрирован?Логин.
Stokker использует файлы cookie. Продолжая, вы соглашаетесь на использование файлов cookie. Чтобы отказаться от файлов cookie, измените настройки веб-браузера вашего устройства и удалите сохраненные файлы cookie.
Мы используем файлы cookie на веб-сайте Stokker, чтобы предоставить вам наилучший пользовательский интерфейс. Выбирая «Я согласен», вы соглашаетесь на использование всех файлов cookie. Осмотреть поближе.