Milling disc 115/125 mm HSD-F ALUMASTER

The innovative High Speed Disc ALUMASTER
is a unique tool with an extremely high stock
removal performance, which was specially
developed for use on angle grinders. The latest
new development from PFERD is ideal for
processing aluminium as it does not generate
hazardous or explosive dust. The special design
of the tool also guarantees maximum safety.
It consists of ten specially developed tungsten
carbide cutting inserts, which are fixed to the
very light, but extremely robust GRP disc. The
innovative geometry of the disc and the possibility
of turning or replacing the cutting inserts
when they are worn allow the very long and
cost-effective use of this uniquely safe solution
for processing aluminium.

Advantages:

* Extremely high stock removal performance
* Maintains the user's health as no hazardous
or explosive dust is generated
* Maximum safety thanks to the innovative
cut geometry and the integrated depth
gauge
* Very light and still extremely robust tool
thanks to the innovative GRP disc (weight
similar to that of reinforced grinding wheels)
* Can be used on all standard angle grinders
(dia. 115/125 mm)
* Can be used in almost any location as you
do not need an extractor unit
* Extremely long tool life because of the
innovative disc geometry as well as the
specially developed turnable and replaceable
tungsten carbide cutting inserts
* The tool does not clog up even on
lubricating materials
* Cost-effective and eco-friendly alternative to
reinforced grinding wheels and flap wheels

Recommendations for use:

* For cost-effective use, preferrably use on air
angle grinders with a power output of at
least 1,000 watts or electric angle grinders
with a nominal power of at least 1,400
watts.
* Do not exert unnecessarily high force on
the angle grinder: The High Speed Disc
ALUMASTER already works with low
forces. The weight of the angle grinder is
enough.
* Use the tool at an angle of 5-30°, in special
cases of up to 60°.
* Avoid deep penetration. The milling disc is
not a cutting tool.
* Process workpiece edges along and not
against the workpiece edge.
* Do not decelarate the tool on the workpiece.
The cutting inserts might break.

Application examples:

* Work on butt and fillet welds
* Work on edges/chamfering
* Modification of geometries

IMPORTANT

The tool is designed for use on aluminium,
wrought aluminium alloys and cast aluminium
ONLY.